Lace Foot - Pfaff

Perfect for attaching lace or borders together or onto your sewing project.

Preparing the machine

• Needle - right needle
• Stitch type - three thread overlock or three thread standard rolled hem
• Stitch length - 1.5 mm - 3 mm
• Differential feed lever - Normal position
• Upper knife - Working or non working position

Sewing

1. Place the fabric under the guide finger and lace on top of the guide finger.
2. If necessary, loosen screw and slide guide plate to the left or right to adjust stitche width.
3. Tighten screw
4. Guide lace along guide plate and sew

Note - If there is no necessity to cut the fabric edge, place bth fabric and lace on top of the guide finger. Be sure to disengage the upper knife.