Blindhem and Lace Foot - Pfaff

Perfect for applying lace or sewing invisible hems.

Blind hem:-

1. Set overlock or coverlock for the deisred stitch.
2. Attach blind hem foot.
3. Fold and press the hem in place. Turn the back on itself toward the right side of the fabric. Leave 1/4" (6 mm) of the edge exposed.
4. Place the hem under the foot with the fold against the guide on the foot.
5. Loosen the guide screw to adjust the guide to so that the needle just catches the thread of the fold.
6. Guide the fabric as you sew, making sure the fold of the fabric before sewing your project.
7. Open the fabric and press lightly on the wrong side.
8. Test on a scrap piece of fabric before sewing your project.

Lace:

1. Set the overlock or coverlock machine for desired stitch.
2. Attach the blindhem foot.
3. Place the wrong side of the lace to the right of the fabric.
4. Place under the foot with the fabric extending to the right of the guide. The header of the lace will be against the left side of the guide.
5. Loosen the guide screw to adjust the guide so the needle just catches the header of the lace.
6. Guide the fabric as you sew, making sure the header of the lace is always against the guide.
7. When finished, open the lace flat. Fold the seam allowance to the back of the fabric and press.
8. If using insertion lace, repeat on the other side of the lace.