Beading Foot - Pfaff

Attach pre strung beads or pearls with ease.

Preparing the machine:-

• Needle - left or right (left is preferable)
• Stitch type - three thread overlock or wrapped edge overlock
• Stitch length - 3.5 mm
• Differential feed lever - Normal position
• Upper knife - working or non-working position

Sewing

1. Select sewing method A or B or determine the needle position and sew 2 or 3 stitches.
2. Turn hand wheel until needle point is level with fabric surface on its upward stroke. Then insert the end of the string of beads into guide on presser foot.
3. Sew 2-3 stitches by turning the hand wheel.
4. Press beads lightly with left finger while sewing.
5. Sew the last few stitches by turning hand wheel with hand toavoid beads interfering with needle and loopers.