Adjustable blind hem foot offers great versatility for various techniques other than blind hemming.

The guide on the edge of this foot  runs along the fold that is to be caught stitch making it easier to get even, catch stitches.  Can also be used for edge stitching, staystitching and making traditional pin tucks, it can even help when sewing fagotting stitches.

An essential foot for the sewing room.

We will contact you for your machine model so that we can send you the right version for your machine.

This foot is made of a clear synthetic material for better visibility making it ideal for applique work. It also has an elevated heel so that a satin stitch can be sewn and move more smoothly under the foot without being flattened into the fabric.

The design of the applique foot also makes the swing of corners or stitching of curves so much easier.

We will contact you for your machine model so that we can send you the right version for your machine.

The bias binder is used to apply pre-folded bias binding to the edge of fabric in one easy step. It is equipped with a small funnel to fold and guide the binding over the fabric edge before it reaches the needle and can be used with either zig zag or decorative stitches as well as straight stitch. 10Mm – 14mm bias tape can be used.

Optional extra – will work brilliantly in conjunction with the bias binder makers, that allows you to make bias binding form any fabric.

We will contact you for your machine model so that we can send you the right version for your machine.

Blind hemming can sometimes be a little tricky so the blind hem foot goes some way to helping improve this technique. The foot has a metal guide in the centre and three lines struck on the underside. During blind hemming, the fold of the fabric snugs against the guide in the foot for accuracy whilst the lines underneath help to prevent unnecessary slipping. The needle will swing over the metal guide creating slack in the upper tension so that the pick of the stitch is almost invisible.

This foot is also very useful when you want to stitch in the ditch. Place the centre guide in the ditch in the seam. The guide on the underside of the foot spreads the seam allowing you to stitch perfectly in the ditch.

We will contact you for your machine model so that we can send you the right version for your machine.

Good quality ready to wear garments will often have an invisible zip fitted. Invisible zips are suitable for all fabrics from fine silk jersey through to suit weight wools and tweed, once fitted, they will be virtually invisible and will merely look like part of the seam.

The invisible zipper foot makes it easier to sew these zips successfully and have that professional finish.

We will contact you  for your machine model so that we can send you the right version for your machine.

This foot has 3 small grooves to allow thin cord to pass through and line up so when stitched with decorative stitches or zig zag satin stitch, the cords are stitched neatly to the fabric. Can use with 1,2,or 3 cords, yarns, crochet thread and combined with cording satin stitches (not available on all machines), creates and textural dimension to your fabric.

We will contact you for your machine model so that we can send you the right version for your machine.

The embroidery foot is used for free hand embroidery and darning to ensure proper stitch formation, minimise skipped stitches and puckering and also to protect your fingers whilst you move your fabric freely under the needle. Specially beneficial to those just learning how to do free hand embroidery.

We will contact you for your machine model so we can send the right version for your machine.

Optional extras – wooden embroidery hoop, tear away stabiliser backing and water soluble backing.

We will contact you for your machine model so that we can send you the right version for your machine.

 A popular foot with patchworkers for that essentials 1/ " seam. The guide on the foot enables you to sew a perfect 1/4" seam every time.

We will contact you for your machine model do that we can send you the right version for your machine.

Pintucks are very popular on blouses, shirts, skirts,lingerie and nightwear. It is a technique much used in heirloom sewing and children clothes. The foot is used with a twin needle to create multiple rows of pintucks. The grooves on the underside of the foot make it easy to stitch several rows of parallel and evenly spaced from each other.

We will contact you for your machine model so we can send you the right version for your machine.

The hemmer foot is used to stitch the narrow rolled hems usually found on shirt tails, table linens and along the edges for frills and brilliant for chiffon or organza hems.

The hemmer is designed with a scroll shaped feeder on top and a straight groove on the underside which determines the width of the finished hem. The 4mm -6mm set will allow for the use of heavier fabrics.

We will contact you for your machine model so we can send you the right version for your machine.

As it's name suggets, this foot has rollers that roll against the fabric and act very much like the track on a bulldozer for sewing up and over heavy seams and uneven surfaces. Ideal for sewing heavy fabrics the rollers move freely between the foot and the feed dogs so that the foot rides easily over varying thicknesses. Also used to sew sticky leathers and vinyls.

We will contact you for your machine model so that we can send you the right version for your machine.

For use with all sewing machines, the rotary foot is effective for preventing stretchy fabrics, jersey and knitted fabrics and hard feed materials, like leather or vinyl from slipping or puckering.

The attachments provided with the foot include:

1. Bias-tape sewing attachment – this is adjustable and enables you to attach folded bias tape up to 20mm wide

1. Blind Hem attachment – this enables accurate feeding of the fabric to achieve a consistent blind hem.

1. Wide Rolled Hem attachment – this enables wide rolled hems to be sewn in the following sizes, ½ ", ¾ " and 1".

All the attachments are used whilst sewing with the even foot giving accurate feeding of any type of fabric.

We will contact you for your machine model so that we can send you the right version for your machine.

Ruffler Attachment – will fit all models except 6500P and 6600P

Rufflers have been around for a very long time and have changed very little over the years, they have however remained very popular. They are designed to ruffle or pleat fabric to the desired fullness quickly and easily and have the capability to vary the sizes of ruffles. Only really suitable on lightweight fabrics and not furnishing fabrics.

We will contact you for your sewing machine model so we can send the right version for your machine.

Ruffler Attachment – will fit all models except 6500P and 6600P

Rufflers have been around for a very long time and have changed very little over the years, they have however remained very popular. They are designed to ruffle or pleat fabric to the desired fullness quickly and easily and have the capability to vary the sizes of ruffles. Only really suitable on lightweight fabrics and not furnishing fabrics.

We will contact you for your sewing machine model so we can send the right version for your machine.

The straight stitch foot is often used on very fine or heavy fabrics. The foot is flat on the underside to provide an even pressure against the feed teeth and it has round needle hole which offers the benefit of more support around the needle to prevent skipped stitches and puckering. It must be used in the centre needle postion.

We will contact you for your machine model do that we can send the right version for your machine.

The walking foot, sometimes referred to as the even feed foot, is designed with a set of feed teeth which allows the fabric to feed without shifting or slipping and eliminates the problem of the underlayer of fabric coming up short.

The Walking Foot is a must for the quilter and can be used with either straight or decorative stitches. The quilter guide will help maintain perfect parallel lines with stitching.

We will contact you for your machine model so that we can send you the right version for your machine.

Sewing on beads and pearls has always been a tedious task, but the Beading Feet now go some small way to alleviating this and adds pleasure to embellishing. Popular for bridal wear, evening wear, smart/casual or craft, the beading foot set is a blessing.

There are two feet in the set, the foot with a narrow groove will attach strung beads to 2mm in diameter.

The foot with a wide groove will attach strung beads from 2.5 – 4.0mm in diameter. These feet can also be used for attaching similar diameter decorative cords for embellishment.

A definite choice for decorative work. Only for sewing beads that have been strung first or come on beads by the metre.

We will contact you for your machine model so that we can send you the right version for your machine.